Categories
How To Guides

How to instantly set up FaceID on your iPhone

If you have got an iPhone which is above iPhone X then you might have noticed that it has not been equipped with Touch ID sensor that lets the phone to detect the faces automatically and act as a protection layer which is known as FaceID. FaceID is actually a facial recognition system that has been developed by Apple Inc. for it’s many devices which include iPhone and iPad etc. FaceID is based on the facial recognition sensor that has got two parts a dot projector module and an infrared camera. The dot projector module projects more than 30,000 infrared dots on the face of the users and the infrared camera reads the patterns.

Setting up a FaceID is very easy and simple procedure and within no time the setup process will be completed. In order to setup FaceID on your iPhone you need to follow these simple steps.

In order to set up Face ID you are required to first set a passcode for your device which you can be done by going to Settings>FaceID & Passcode>Passcode.
Now you need to to select whether you want a four digit or a six digit passcode.
Once the passcode is set now you can go to the Face ID & Passcode page. Now you are required to enter your passcode and then tap on the Set up Face ID option.
Now the instructions for registering your face will show up and you need to follow them.
You can also set up an alternative Face ID for your partner for unlocking your device when you need. To do this you need to follow these steps.

First of all go to Settings>Face ID & Passcode and then enter your passcode.
Now you need to tap on the ‘Set Up an Alternate Appearance‘.
Now you need to follow the onscreen instructions for registering your partners face.
Face ID can work with scarves, hats, contact lenses, glasses and various sunglasses. But remember it won’t work with masks so in this pandemic era you will not be able to unlock the phone by using this feature.

Categories
How To Guides

Apple has released iOS 14.1, iPadOS 14.1 update

Apple has just released iOS 14.1 and iPadOS 14.1 updates for iPhones and iPad respectively. Both of these updates has brought several enhancements as well as bug fixes whicj includes 10-bit HDR video playback as well as edit support. Here we are going to take a look at iOS 14.1 and iPadOS 14.1.

Features of iOS 14.1 and iPadOS 14.1
With iOS 14.1 update, Apple has added the support for 10-bit HDR video playback as well as editing for iPhone 8 and above. The update fices various different issues like widgets, folders as well as the icons that appeared in the smaller size, emails in the Mail app were sent from an incorrect alias as well as incoming calls were prevented from displaying the region information. The update also fixes the problem which has caused a temporary reduction of the streaming video resolution at the beginning of playback. The calculator issue has also been fixed which prevented the zeros from appearing on the screen. An issue which was restricting the users to download or add the songs to their library while viewing an album or playlist. Another issue related to Files app causing problems with MDM-managed cloud service providers to wrongly display content has also been fixed. iOS update has also fixed various issues related to Apple Watch. The issues include setting up family member’s Apple Watch as well as case material being displayed incorrectly in the Apple Watch app. However iOS 14.1 has not fixed battery drain issue that was found in the iOS 14 update. At the moment the only fix to this issue is to reset the phone to factory settings.

On the other hand iPadOS 14.1 update has also brought the support for 10-bit HDT video playback and editing for iPad Pro 12.9-inch and later, iPad Pro 11-inch, ipad Pro 10.5-inch, iPad Air and later. In addition to that the update has brought fix for all of the problems which are found in iOS related to home screen icons, music library, Mail app, Files app and more.

Categories
AutoCAD

Drawing a Polygon in AutoCAD

AutoCAD is a must have tool for engineers for creating engineering drawings. Architects can also use it for creating impressive architectural designs. The producitivity has been improved greatly with AutoCAD. In this tutorial you will learn how to create a polygon in AutoCAD. Polygon is a plane figure that is bounded by finite number of straight line segments. The segments are called the edges or sides. And the two sides which meet at the point is called vertex or corner. The interior portion of the polygon is known as its body. You can also learn about Drawing a Plate with a Hole.

In order to create a polygon in AutoCAD you need to follow these simple steps.

1st of all you need to open a new drawing and for that you need to click New from the menu bar.
You need to make sure that ORTHO mode is ON (It will be ON when it glow in blue). Click the icon to turn it ON or OFF or press F8 to toggle.
Now type z [space bar], e [space bar] and theis will zoom extents the drawing area.
Now click on Draw>Polygon.
Now you need to enter the number of sides and in this tutorial we will type 6 and then press enter.
Now you have to specify the center of the polygon and type 0,0 [Enter].
Now click on Circumscribed about circle.
Move the cursor upward and then type 1 as polygon radius.
You are done now and with these simple steps you will be able to create polygon (Hexagon in this tutorial) easily.

Categories
Windows 10

How to Send a Web Note in Edge Browser in Windows 10

Windows 10 has got Edge browser which has enhanced the Internet browsing to a great degree. Edge browser has got loads of features for impressive web browsing. One of the features in Edge is Web Note which will let you doodle on any web page and then share it with your colleagues. This feature will come in handy when you are required to share your notes with teammates. Finding the WebNote feature and the starting the drawing is a piece of cake. Sharing tough is a bit tricky as the default format for sharing is a Web page (HTML). You can also learn about Drawing a Polygon in AutoCAD.

In order to send a Web Note you need to follow these simple steps.

1st of all you are required to open the page which you want to draw on in Edge.
Now click or tap on the Web Note icon (A pen in a square icon.) located at the top right of the screen.
Now you need to draw what ever you want. For drawing you need to scribble with your Pen and Highlighter tools on the top left of the page. You can add typed comment as well which can be done by selecting speech bubble icon. Cropping can also be done with the Clip tool.
Now you need to tap on the Share button located at the top right next to the word Exit.
Now press the dropdown arrow next to the title of your Web Note to select the format which you want to share. Image or Web page can be sent in HTML format.
Now is the time to select the location where you want to share your Web Note like Facebook and OneNote etc.
Now fill out the caption or any additional info. You can also select to share this on your timeline or on your friend’s timeline.
Now tap on Post and your Web Note will be shared.

Categories
AutoCAD

AutoCAD Coordinates System

AutoCAD is an impressive 3D CAD application which is considered as a must have tool for the engineers. With AutoCAD you can create engineering and architectural designs with ease. In this tutorial you will learn about the Coordinates System. There are 3 different coordinates system which includes Absolute coordinates, Relative coordinates and Polar coordinates. You can also learn about How to password Protect a Folder in Windows 10.

Absolute Coordinates:
IN Absolute Coordinate system all of the input points specify in your drawing by using the standard Cartesian coordinates x and y. The points are entered are typing x,y [Enter]. In order to specify point in Absolute coordinate system in AutoAD you need to follow these simple steps.

1st of all enter the LINE command by pressing L and then [Enter].
Start the line at point A: 0,0 and the press [Enter].
Now specify the ending point of the line at point B: 2,2 and press [Enter].
Now end the 2nd line at point C: 2,3 and press [Enter].
Relative Coordinates:
In Relative coordinate system once the 1st points are entered the next points can be entered by specifying the next coordinate comparing from the 1st points. The relative coordiante starts with @. The points entered in Relative coordinates is by typing @x,y [Enter].

In order to specify your points with Relative coordinate system you need to foollow these simple steps.

1st of all you need to enter LINE command by pressing L and then [Enter].
Now start creating a line at point A: 0,0 and then [Enter].
Now specify the ending point of the line at point B: @2,2 and press [Enter].
Now end the 2nd line at point C: @0,1 and then [Enter].
Polar Coordinates:
Polar coordinates are used for drawing the points by specifying angles. In AutoCAD Polar coordinate system specifies the distance length at which angle. In order to specify points by using Polar coordinate system you need to follow these simple steps.

1st of you you need to enter LINE command by pressing L and then [Enter].
Now start the line at point A: 0,0 and then [Enter].
Now end the 1st line at point B: @2.5<45 and then [Enter]. Enter the 2nd line at point C: @1<90 and then [Enter].

Categories
AutoCAD

Drawing a Simple Plate with AutoCAD

AutoCAD is a productive 3D CAD tool which can be used for creating imposing engineering and architectural designs. It is a must have tool for the engineers and architectures. With this tool the productivity has been enhanced to a great degree. In this tutorial you will learn how to draw a simple plate in AutoCAD. We are going to create a simple L shaped plate.You can also learn about AutoCAD Coordinates System. In order to draw L shaped plate you need to follow these simple steps.

1st of all you need to open a new drawing by clicking on New.
You need to make sure that the ORTHO mode is ON. (It will be ON when it glow in blue.) Click the icon to turn it ON or OFF or press F8 to toggle.
Now type z [space bar]. With this your drawing area will be zoomed.
Now activate the line command by click LINE.
Now specify the 1st point of the line at 0,0. Type 0,0 and then press [Enter].
Now move your cursor towards the right side and then type 8 [Enter].
Now move your cursor up side and then type 4 [Enter].
Now move your cursor towards the left side and then type 4 [Enter].
Now move your cursor up side and then type 4 [Enter].
Now move your cursor towards the left side and then type 4 [Enter].
For closing the sketch loop you need to type c [Space bar].
With this step you will complete creating a simple L-shaped plate in AutoCAD.

Categories
AutoCAD

How to Draw a Plate with a Hole in AutoCAD

AutoCAD is an impressive 3D application which can be used for creating some amazing engineering drawings and architectural designs. With AutoCAD the productivity will be enahnced greatly. In this tutorial you will elarn how to draw a plate with a hole. You can also learn about Inserting Pictures in MS PowerPoint 2016.

In order to draw a plate with a hole you need to follow these simple steps.

1st of all you need to create a new drawing by clicking New from the Menu bar.
You need to make sure that the ORTHO mode is ON. (It will be ON if it glow in blue) Click the icon to turn it ON or OFF or you can press F8 to toggle.
Now type z [space bar], e [space bar] and theis will zoom extents the drawing area.
Now you need to activate the rectangle command by clicking Rectangle.
Now you need to specify the 1st corner point of the rectangle at 0,0. (Type 0,0 and press Enter.)
Now you need to move your cursor to the right side and then specify other corner point at 10,6. (Type 10,6 and press Enter)
Now is the time to right click at Object Snap Tracking (1) and click Midpoint (2) to activate Midpoint object snap.
Now click in the Line icon and then draw a cross line from left to right. Point your cursor at the midpoint of the rectangle.
You need to click on it when the cursor will change to green triangular shape. That is the midpoint of left vertical line.
Now move the cursor to right edge midpoint and move cursor until it changes to green triangle shape and click on it.
Now is the time to create a hole and for that you need to click CIRCLE.
Now point the center point of the circle at midpoint of the previous line. When the cursor change the green triangle click on it.
Specify the radius of the circle to 2 and for that type 2 and then press Enter.
Now click on the middle line of the rectangle and press Delete key.
With these steps the plate with a hole will be ready.

Categories
Windows 10

How to Add or Remove Cortana from Windows 10 Lock Screen

With Windows 10 Anniversary Update, Cortana has been made available from the lock screen. You can use Cortana for getting the weather forecast, checking the upcoming flight and for setting the reminders which will sync with the phone without taking the time to log in. You can let Cortana to send email and text as well as to add events to your calendar. The assistant can be accessed simply by sayig Hey Cortana or by tapping a dot on the display. In order to setup Cortana on your lock screen you need to follow these simple steps.

1st of all select the Ask me anything field.
After this select the Gear icon.
Now you need to turn the Lock Screen ON or OFF.
If you want to enable the digital assistant to send emails, SMS from lock screen youn eed to check “Let Cortana access my calendar, email….”
Enale Hey Cortana if you want Cortana to be launched from the lock screen with your voice.
With these simple steps you have enabled access to Cortana from the lock screen.
Enabling Tappable Cortana on the Lock Screen:
Now if you orefer to access Cortana by simply tapping an icon instead of saying Hey Cortana here is a step by step guide for that.

1st of all select Ask me anything field.
Now select the gear icon.
In the next step turn Hey Cortana ON or OFF.
Now click on Lock screen settings.
Now click on Windows spotlight.
Select the picture or slideshow.
Congrats you have enable tappable Cortana on the lock screen.

Categories
Windows 10

How to Send Email with Cortana in Windows 10

Sending an Email may often become a time-taking and laborious activity especially when yu are in a hurry as it involves opening of the app, starting a draft and then toggling through a series of fields. With the natural language recognition Cortana allows you to send email with less effort and with few simple steps. In order to send email with Cortana you need to have an account setup in Windows Mail before you try to compose email through Cortana. Once you have been equipped with Windows Mail account you are just few steps away from sending emails and messages with a little effort. You can also learn about How to Add or Remove Cortana from Windows 10. In order to send emails with Cortana in Windows 10 you need to follow these simple steps.

1st of all you need to click on Ask me anything box and then type or say I want to send an email to (person’s name) followed by the message body. Now if you want same action to be performed by speaking you need to make sure that Cortana has been set to respond on your voice.
Now in the next step you need to select the contacts to whom you want to send the email to. Cortana will prompt you if there is more than one contact which will match the name you wrote or spoke.
Change any part of the email which you like by selecting the fields and editing the text.
Now click on Send when it is ready and email is sent.
With these simple steps you will be able to send the emails with Cortana in Windows 10.

Categories
AutoCAD

How to Turn Your Windows PC into a Wi-Fi Hotspot using Command Line

Windows 10 has got a built-in Wi-Fi hotspot feature just like in Windows 7 and Windows 8. The Wi-Fi hotspot feature will let you share your computer’s internet access. There are several different methods for turning your Windows PC into Wi-Fi hotspot and one of them is to turn it on from the Command Line. You can also learn about How to Turn Your Windows into a Wi-Fi Hotspot with Connectify. In order to turn your Windows OC into Wi-Fi Hotspot you need to follow these simple steps.

1st of all open a command prompt with administrative privileges. The easiest and quickest way is to tap the Windows key and type in cmd. Then right click on the Command Prompt app listing and select “Run as an Administrator.”
In the command prompt window you need to type in netsh wlan set hostednetwork mode=allow ssid=[SSID] key=[bpassword].
Replace SSID and password with the network name which you want for Wi-Fi network and the password for it.
Now type netsh wlan start hostednetwork at the prompt and then press Enter to start the network.
Now you need to open Network Connections.
Now right click on your main network connection and select Properties.
Now go to the Sharing tab and then click the checkbox that is labeled as Allow other network users to connect through this computer’s internet connection.
In the dropdown box select the network connection your computer is currently using and then click OK.
With these simple steps you can easily set up the new Wi-Fi hotspot. For stopping the hosted network type in netsh wlan stop hostednetwork in the command prompt and then press Enter.